INDUSTRIAL WASHING MACHINE
High Pressure Deburring Machines
It is used for breaking the burrs left on the machined surfaces and their edges or breaking the corners.
High-pressure Deburring Machines work with pressures between 150 and 1200 bars.
It works by being programmed to scan the targeted points of machined surfaces and corners.
Different prescriptions are applied according to the structure of each part.
The system is loaded into the cabin by the operator and works fully automatically.
It is possible to design according to any material and desired process.
Fully automatic burr crushing and surface drying operations with air jet are carried out with movable slide table, part holding systems.
Deburring can be applied to all sensitive points on the part.
| FEATURES of High Pressure Deburring Machines | YB-1250- AL- FE |
| Washing Room Basket Dimensions | 1750x1000x750 mm |
| Movable Table Washing Capacity | 2 Pieces in Average 40-60 Seconds |
| Forward-Backward Movement Distance | Movement Length 1000 mm |
| Material Loading Height | 900 mm |
| Washing Procedures: | |
| Washing Tank Capacity and Heating | 750 Liter- 22.5 kW |
| Return Tank Capacity and Heating | 500 Liter- 15 kW |
| Washing Pressures AL bar. | Burr Crushing between 120 bar-300 bar |
| Washing Pressures FE bar. | Burr Crushing in the range of 400 bar-1200 bar |
| Nozzle Motion System | Linear Slide and Servo Motor Moving |
| Material Fixing | Movable special locking mechanisms |
| Heating | Resistance |
| Centrifuge Cartridge Filter System (25-50 Micron) | Standart |
| Automatic Level Control | Standart |
| Steam Condenser System | Standart |